NeuroTrac™ TENS - pain relief (Code: AE-TENS)

The NeuroTrac ™ TENS is a dual channel device for pain relief.

Price: 85.00 EUR
plus shipping
Operation not subject to VAT made pursuant to art. 1, paragraphs 54 to 89 of Italian Law no. 190/2014 - Flat-rate scheme.
Length: 11,9 cm
Width: 6,9 cm
Depth: 2,9 cm
Numero di pezzi nella confezione: 1
Availability: Available

The NeuroTrac ™ TENS is a dual channel device for pain relief.
Basic dual channel digital TENS machine for pain relief.
Simple and practical for a wide range of pain management techniques.
Modes: high and low frequency, burst, continuous and modulated. 11 preset programs, 3 customizable TENS programs.
Mode lock function to measure and record domestic compliance (mA and time used).
The clear bright backlight of the LCD makes it easier to read the display in low light or dark conditions.
Keyboard with larger buttons for ease of use.
Compact, light and reliable.
Technical specifications:

Dual channel: individually isolated circuits.
Amplitude: 0 - 80 mA on a 500 Ohm load; indication only. The actual mA will tend to be lower than that indicated due to the electrode impedance: at 1000 Ohm load (electrodes in bad conditions) the maximum will be limited to 70 mA, at 1500 Ohm load the maximum will be limited to 65 mA .
Type: constant current, maximum output voltage 180 Volt +10 / -30 Volt
Waveform: asymmetric, rectangular biphasic with zero DC current.
Pulse width selectable: 50mS -300mS [2% accuracy].
Pulse rate selection: in continuous mode 2 Hz - 200 Hz [accuracy 2%].
Mode: continuous, burst or modulated.
Burst mode: bursts of 9 pulses [200 mS] at 150 Hz, repeating twice per second.
Modulation mode: 6-second cycle of simultaneous width modulation and pulse repetition frequency modulation. Width that starts at 200 mS and decreases exponentially to 100 mS in three seconds, then returns to 200 mS in the following three seconds. Frequency that starts at 100 Hz, decreasing exponentially at 65 Hz and then returning to 100 Hz.
Duration of treatment selectable: from 1 minute to 12 hours.
Low battery indicator: if the battery drops below 6.9 volts +/- 0.2 volts, the battery symbol will flash / turn off once per second.
If the battery voltage is less than 6.6 (+/- 0.2) volts the unit will not turn on.
Open electrode detection: if an open circuit is detected on the output of channel A or B, the output current will be reset to zero.
Physical dimensions: 119.2 x 69 x 28.7 mm

Weight: 0.07 kg without battery, 0.1 kg with battery.

Write a comment for this product!
Please write comment
Rating for product
Copyright MAXXmarketing GmbH